| Peer-Reviewed

Assessment of the Workplace Conditions and Health and Safety Situation in Chemical and Textile Industries of Pakistan

Received: 9 October 2015     Accepted: 4 November 2015     Published: 5 December 2015
Views:       Downloads:
Abstract

The study was conducted to assess the workplace conditions, health and safety situations in textile and chemical industries of one of the commercial cities of Pakistan i.e. Faisalabad. Risk assessment was conducted through qualitative and quantitative assessment methods. The effluents and gases emissions in the textile and chemical mills of Faisalabad were monitored. Results indicated the working conditions in the work place were not conducive for maximum productivity and there was high risk that may be befalling to the workers from multiple hazards exacerbated by inadequate physical conditions. Over all the temperature, humidity, noise and light levels were either below or above the defined NEQS (National Environmental Quality Standards) at multiple places in each industry. Workers are uninformed of the health and safety protocols at workplace and there is a dire need to give trainings and awareness regarding health and safety issues.

Published in Science Journal of Public Health (Volume 3, Issue 6)
DOI 10.11648/j.sjph.20150306.20
Page(s) 857-864
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2015. Published by Science Publishing Group

Keywords

Health and Safety, Chemical Industry, Textile Industry, NEQS, Workplace Physical Conditions

References
[1] Ahasan, M.R., Partanen, T., and Leek, 2000. Occupational health and safety in the third world, a simple case of neglect in sohnhy. Human space time environment, procedure of 5th international copa, 247-252.
[2] Awan, T., 2001. Occupational health and safety in Pakistan asian labor update, Piler Kowloon, Hong Kong, 39: 10-15.
[3] Beck, U., 1992. Risk Society: Towards a New Modernity. London: Sage.
[4] Chrostek, A., 2005. Occupational health & safety in textile. Happy new haven teacher’s institute, 2: 3-5.
[5] Cockshott, J. E., 2005. Probability bow ties a transparent risk management tool. Journal of process safety and environmental protection, 83(B4):307-316.
[6] DHHS (NIOSH), 2009. Qualitative risk characterization and management of occupational hazards. Journal of control bonding, 152 92009).
[7] Demis, P., 1997. Quality, safety and environment. Journal of American society for quality control, U.S.A, 132-159.
[8] Fantahum, M., and Abebe, Y., 1999. Self reported disease conditions among workers of textile mill bahiroar, North west ethiopia, Ethiopian Journal of Health Development, 3(3): 3-4.
[9] Frank, T., Brooks, S., Creekmore, R., Asselbalch, B., Murray, K., Obeng, K., Reich, S. and Sanchez, E., 2008. Quality risk management principles and industry case studies, 1-9.
[10] Hood, J. and Allison, J., 2001. Local Authority Corporate Risk Management. A Social Work Case', Local Governance, 27 (1): 3-18.
[11] Jelemenesky, L., Harisova, J., and Markos, J., 2003. Reliable risk estimation in the risk analysis of chemical industry case study, Ammonia storage pressurized spherical tank, 30th international conference of the slovak society of chemical engineering, 58: 48-54.
[12] Laitinen, H., 2011. Monitoring workplace safety and health at manufacturing industry. ECBOHS project erdemir workshop.
[13] Mohamed. M. Y. A., 2008. Risk assessment of hazardous chemicals, A case study in chemistry research laboratories of University of Science Malaysia, 2-20.
[14] Needham, 2005. Risk assessment of hazardous chemicals, A case study in chemistry research laboratories of University of Science Malaysia, 25-40.
[15] Posted, 2000. Cambridge University. Journal of hazard identification, 89-115.
[16] Pitt, M. J., 1994. Hazard and operability studies, A tool for management analysis facilities, 12 (13): 5-8.
[17] Paithankar, A., 2011. Hazard identification and risk analysis in mining industry. Department of mining engineering, National Institute of Technology Rourkela, 107 (26).
[18] Qureshi, A. R., 1988. The role of hazard and operability study in risk analysis of major hazard plant. Journal of loss prevention in process industries, 1: 104-109.
[19] Stalker, K., 2003. 'Managing risk and uncertainty in social work', Journal of social work, 3(2): 211-233.
Cite This Article
  • APA Style

    Najaf Shah, Farhat Abbas, Yawar Abbas, Syed Ali Haider, Qasim Khan, et al. (2015). Assessment of the Workplace Conditions and Health and Safety Situation in Chemical and Textile Industries of Pakistan. Science Journal of Public Health, 3(6), 857-864. https://doi.org/10.11648/j.sjph.20150306.20

    Copy | Download

    ACS Style

    Najaf Shah; Farhat Abbas; Yawar Abbas; Syed Ali Haider; Qasim Khan, et al. Assessment of the Workplace Conditions and Health and Safety Situation in Chemical and Textile Industries of Pakistan. Sci. J. Public Health 2015, 3(6), 857-864. doi: 10.11648/j.sjph.20150306.20

    Copy | Download

    AMA Style

    Najaf Shah, Farhat Abbas, Yawar Abbas, Syed Ali Haider, Qasim Khan, et al. Assessment of the Workplace Conditions and Health and Safety Situation in Chemical and Textile Industries of Pakistan. Sci J Public Health. 2015;3(6):857-864. doi: 10.11648/j.sjph.20150306.20

    Copy | Download

  • @article{10.11648/j.sjph.20150306.20,
      author = {Najaf Shah and Farhat Abbas and Yawar Abbas and Syed Ali Haider and Qasim Khan and Nosheen Asghar and Sifat Noor and Syed Naeem Abbas and Nawazish Ali and Attarad Ali},
      title = {Assessment of the Workplace Conditions and Health and Safety Situation in Chemical and Textile Industries of Pakistan},
      journal = {Science Journal of Public Health},
      volume = {3},
      number = {6},
      pages = {857-864},
      doi = {10.11648/j.sjph.20150306.20},
      url = {https://doi.org/10.11648/j.sjph.20150306.20},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.sjph.20150306.20},
      abstract = {The study was conducted to assess the workplace conditions, health and safety situations in textile and chemical industries of one of the commercial cities of Pakistan i.e. Faisalabad. Risk assessment was conducted through qualitative and quantitative assessment methods. The effluents and gases emissions in the textile and chemical mills of Faisalabad were monitored. Results indicated the working conditions in the work place were not conducive for maximum productivity and there was high risk that may be befalling to the workers from multiple hazards exacerbated by inadequate physical conditions. Over all the temperature, humidity, noise and light levels were either below or above the defined NEQS (National Environmental Quality Standards) at multiple places in each industry. Workers are uninformed of the health and safety protocols at workplace and there is a dire need to give trainings and awareness regarding health and safety issues.},
     year = {2015}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Assessment of the Workplace Conditions and Health and Safety Situation in Chemical and Textile Industries of Pakistan
    AU  - Najaf Shah
    AU  - Farhat Abbas
    AU  - Yawar Abbas
    AU  - Syed Ali Haider
    AU  - Qasim Khan
    AU  - Nosheen Asghar
    AU  - Sifat Noor
    AU  - Syed Naeem Abbas
    AU  - Nawazish Ali
    AU  - Attarad Ali
    Y1  - 2015/12/05
    PY  - 2015
    N1  - https://doi.org/10.11648/j.sjph.20150306.20
    DO  - 10.11648/j.sjph.20150306.20
    T2  - Science Journal of Public Health
    JF  - Science Journal of Public Health
    JO  - Science Journal of Public Health
    SP  - 857
    EP  - 864
    PB  - Science Publishing Group
    SN  - 2328-7950
    UR  - https://doi.org/10.11648/j.sjph.20150306.20
    AB  - The study was conducted to assess the workplace conditions, health and safety situations in textile and chemical industries of one of the commercial cities of Pakistan i.e. Faisalabad. Risk assessment was conducted through qualitative and quantitative assessment methods. The effluents and gases emissions in the textile and chemical mills of Faisalabad were monitored. Results indicated the working conditions in the work place were not conducive for maximum productivity and there was high risk that may be befalling to the workers from multiple hazards exacerbated by inadequate physical conditions. Over all the temperature, humidity, noise and light levels were either below or above the defined NEQS (National Environmental Quality Standards) at multiple places in each industry. Workers are uninformed of the health and safety protocols at workplace and there is a dire need to give trainings and awareness regarding health and safety issues.
    VL  - 3
    IS  - 6
    ER  - 

    Copy | Download

Author Information
  • Department of Environmental Sciences, Government College University Faisalabad, Pakistan

  • Department of Environmental Sciences, Government College University Faisalabad, Pakistan

  • Department of Earth and Environmental Sciences, Bahria University, Islamabad, Pakistan

  • Department of Earth and Environmental Sciences, Bahria University, Islamabad, Pakistan

  • Department of Environmental Sciences, Quaid-i-Azam University, Islamabad, Pakistan

  • Department of Environmental Sciences, Quaid-i-Azam University, Islamabad, Pakistan

  • Department of Environmental Sciences, Quaid-i-Azam University, Islamabad, Pakistan

  • Forest and Wildlife Department Gilgit, Pakistan

  • Department of Agriculture and Food Technology, Karakoram International University, Gilgit, Pakistan

  • Department of Biotechnology, Quaid-i-Azam University, Islamabad, Pakistan

  • Sections